Upgrading Options - Siemens FIDAMAT 6 Operating Instructions Manual

Hardware requirements
● PC/laptop Pentium 133 MHz, RAM 32 MB, CD-ROM drive
● At least 35 MB free disk space
● VGA graphics card supported by Windows
● Printer supported by Windows
● A free COM port with RS485 or one of the available converters for RS232/Ethernet/USB
with respective connector is necessary for the connection.
● In the case of an RS485 network, the distance should not exceed 500 m. If this distance
is exceeded, a repeater must be used.
Software requirements
● Windows 7
● Windows 10
3.6.3.2

Upgrading options

You can order the current device firmware as a chip set with the following article numbers:
Firmware upgrades for older analyzers
FIDAMAT 6-E
German
English
French
Spanish
Italian
FIDAMAT 6-G
German
English
French
Spanish
Italian
It is possible to upgrade the device firmware of older gas analyzers using the SIPROM GA
software. Contact Service regarding this. You can find information on this in the section
"Technical support (Page 175)".
FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
3.6 Communication
Article number
A5E00223093
A5E00223146
A5E00223149
A5E00223152
A5E00223155
A5E00409885
A5E00409929
A5E00409947
A5E00409962
A5E00409966
Description
33