Table of Contents
Advertisement
5. PARAMETERS
No./symbol/
Setting
name
digit
PN24
Set the 1st octet of the IP address of the network device allowed to be connected in
decimal.
*IPAF1
When [Pr. PN24] to [Pr. PN27] are all set to "0", the function is disabled.
IP address
filter 1
Setting range: 0 to 255
PN25
Set the 2nd octet of the IP address of the network device allowed to be connected in
decimal.
*IPAF2
When [Pr. PN24] to [Pr. PN27] are all set to "0", the function is disabled.
IP address
filter 2
Setting range: 0 to 255
PN26
Set the 3rd octet of the IP address of the network device allowed to be connected in
decimal.
*IPAF3
When [Pr. PN24] to [Pr. PN27] are all set to "0", the function is disabled.
IP address
filter 3
Setting range: 0 to 255
PN27
Set the 4th octet of the IP address of the network device allowed to be connected in
decimal.
*IPAF4
When [Pr. PN24] to [Pr. PN27] are all set to "0", the function is disabled.
IP address
filter 4
Setting range: 0 to 255
PN28
Set a value for the 2nd octet range of the IP address of the network device allowed
to be connected. The range for the IP address of the network device allowed to be
*IPAF2
connected is between [Pr. PN25] and [Pr. PN28].
IP address
Set a value in decimal.
filter 2 range
specification
Setting "256" will disable the function.
Setting range: 0 to 256
PN29
Set a value for the 3rd octet range of the IP address of the network device allowed to
be connected. The range for the IP address of the network device allowed to be
*IPAF3
connected is between [Pr. PN26] and [Pr. PN29].
IP address
Set a value in decimal.
filter 3 range
specification
Setting "256" will disable the function.
Setting range: 0 to 256
PN30
Set a value for the 4th octet range of the IP address of the network device allowed to
be connected. The range for the IP address of the network device allowed to be
*IPAF4
connected is between [Pr. PN27] and [Pr. PN30].
IP address
Set a value in decimal.
filter 4 range
specification
Setting "256" will disable the function.
Setting range: 0 to 256
PN31
Set the 1st octet of the IP address of the network device allowed to be connected in
decimal.
*IPOA1
When [Pr. PN31] to [Pr. PN34] are set to all "0", the function is disabled.
Operation
specification
IP address 1
When the function is enabled, the servo amplifier allows the following data 1) to 3) to
be imported only if the IP address of the master station (external device) matches
with the operation specification IP address. If they are mismatched, the data is
discarded.
1) SDO Download (command: 4020h, sub command: 0002h)
2) SDO Object SubID Block Download (command: 4020h, sub command: 0006h)
3) CC-Link IE Field Network Basic request message (RWwn)
Monitoring, parameter setting, and test operation can be executed via Ethernet when
the IP addresses of a personal computer (MR Configurator2) and GOT are within the
range of the operation specification IP address. When out of the range,
communication to the servo amplifier cannot be established.
Setting range: 0 to 255
Function
5 - 5
Initial
value
[unit]
0
0
0
0
256
256
256
0
Advertisement
Table of Contents
