Table of Contents
Advertisement
5. PARAMETERS
No./symbol/
Setting
name
digit
PN14
Set the 4th octet of the IP address in decimal.
*IPAD4
Set the IP address assigned by the network administrator.
IP address
When SLMP command (IPAdressSet) is received, the setting of the fourth octet will
setting 4
be written to this parameter.
Refer to table 5.1 for the relation between the setting value of the identification
number setting rotary switch and the parameter setting value.
Setting range: 0 to 255
PN15
Set the 1st octet of the subnet mask in decimal.
*SNMK1
Set the subnet mask assigned by the network administrator.
Subnet mask
The subnet mask can also be changed simultaneously by the SLMP command
setting 1
(IPAdressSet).
Setting range: 0 to 255
PN16
Set the 2nd octet of the subnet mask in decimal.
*SNMK2
Set the subnet mask assigned by the network administrator.
Subnet mask
The subnet mask can also be changed simultaneously by the SLMP command
setting 2
(IPAdressSet).
Setting range: 0 to 255
PN17
Set the 3rd octet of the subnet mask in decimal.
*SNMK3
Set the subnet mask assigned by the network administrator.
Subnet mask
The subnet mask can also be changed simultaneously by the SLMP command
setting 3
(IPAdressSet).
Setting range: 0 to 255
PN18
Set the 4th octet of the subnet mask in decimal.
*SNMK4
Set the subnet mask assigned by the network administrator.
Subnet mask
The subnet mask can also be changed simultaneously by the SLMP command
setting 4
(IPAdressSet).
Setting range: 0 to 255
PN19
Set the 1st octet of the default gateway in decimal.
*DGW1
Set the default gateway assigned by the network administrator.
Default
The default gateway can also be changed simultaneously by the SLMP command
gateway
(IPAdressSet).
setting 1
Setting range: 0 to 255
PN20
Set the 2nd octet of the default gateway in decimal.
*DGW2
Set the default gateway assigned by the network administrator.
Default
The default gateway can also be changed simultaneously by the SLMP command
gateway
(IPAdressSet).
setting 2
Setting range: 0 to 255
PN21
Set the 3rd octet of the default gateway in decimal.
*DGW3
Set the default gateway assigned by the network administrator.
Default
The default gateway can also be changed simultaneously by the SLMP command
gateway
(IPAdressSet).
setting 3
Setting range: 0 to 255
PN22
Set the 4th octet of the default gateway in decimal.
*DGW4
Set the default gateway assigned by the network administrator.
Default
The default gateway can also be changed simultaneously by the SLMP command
gateway
(IPAdressSet).
setting 4
Setting range: 0 to 255
Function
5 - 4
Initial
value
[unit]
0
255
255
255
0
192
168
3
1
Advertisement
Table of Contents
