Disconnecting The Bluetooth Device; Unpairing The Mobile Phone - Yealink CP960 User Manual

User Guide for CP960 IP Pho
Tap to accept the change or
4.
You should make your IP phone discoverable first, and then the pre-configured Bluetooth
device name will display in scanning list of other device.

Disconnecting the Bluetooth Device

To disconnect your Bluetooth device from your IP phone:
Do one of the following:
1.
- Tap
- Swipe down from the top of the screen to enter the control center.
Long tap Bluetooth.
- Tap Settings from the Home screen.
Tap Bluetooth from the Basic block.
Tap the connected mobile phone.
2.
Tap OK to accept the change or Cancel to cancel.
3.
The mobile phone is disconnected. To connect it to your IP phone again, tap the mobile phone
again.

Unpairing the Mobile Phone

You can unpair your mobile phone with your IP phone. When you unpair the mobile phone, the
mobile phone information disappears from the PAIRED DEVICES list. To connect the mobile
phone to your IP phone again, tap the desired mobile phone in the AVAILABLE DEVICES list.
234
ne
.
to cancel.