Disabling Your Device Discovery; Renaming The Paired Bluetooth Devices; Disconnecting The Bluetooth Device; Un-Pairing The Bluetooth Devices - Yealink MP58 User Manual

Procedure
1. Go to
2. Enter the desired name in the Device Name field.
Related tasks
Activating the Bluetooth Mode

Disabling Your Device Discovery

After the Bluetooth is turned on, your device is visible to other Bluetooth-enabled devices by default. You
can disable this feature not to allow your device to be discovered by other Bluetooth devices.
Procedure
1. Go to
2. Turn off Open Discover.

Renaming the Paired Bluetooth Devices

You can rename the paired Bluetooth devices for better recognition.
Procedure
1. Go to
2. Long tap the paired device and then select Details.
3. Enter the desired name in the Rename field.
4. Tap OK.

Disconnecting the Bluetooth Device

You can disconnect the Bluetooth device from your device. After the Bluetooth device is disconnected, it
stays in the paired devices list, so that you can easily connect it to your device next time.
Procedure
1. Go to
2. Select the connected Bluetooth device.
It prompts if you are sure to disconnect.
3. OK.

Un-pairing the Bluetooth Devices

You can unpair your Bluetooth devices with your Teams phone. After unpaired, the Bluetooth devices
disappear from the paired devices list.
Procedure
1. Go to
2. Long tap the paired device and then select Unpaired.
It prompts if you are sure to unpair.
3. Tap OK.
Downloaded from ManualsNet.com
> Settings > Device Settings > Bluetooth.
> Settings > Device Settings > Bluetooth.
> Settings > Device Settings > Bluetooth.
> Settings > Device Settings > Bluetooth.
> Settings > Device Settings > Bluetooth.
search engine
| Teams Device Settings | 55