Using Multicast Paging - Yealink CP960 User Manual

User Guide for CP960 IP Pho
Select the desired channel to listen from the pull-down list of Channel.
6.
The default channel is 0.
Click Confirm to accept the change.
7.
The priorities of listening addresses are predefined: 1 with the highest priority, 31 with the lowest.
Note
Multicast listening addresses are configurable via web user interface only.

Using Multicast Paging

To send RTP stream via a multicast paging key when the receiver's phone is idle:
Tap the multicast paging key from the DSS key screen.
1.
The phone sends RTP to a preconfigured multicast address (IP: Port).
Both the sender's and receiver's phones play a warning tone and the receiver automatically
answers the multicast RTP session in the hands-free (speakerphone) mode.
204
ne