Table of Contents
Advertisement
User Guide for CP960 IP Pho
Tap
Put the CPW90 on the charging cradle and make sure it is charging.
2.
Long tap
3.
The CPW90 enters the registration mode. And the mute indicator LED on the CPW90 fast
flashes yellow.
The CPW90 registers with the IP phone automatically.
To deregister the CPW90 from the IP phone:
Tap Settings from Home screen.
1.
Tap Wireless Microphone from Basic block.
2.
Select the desired microphone and then tap Detail.
3.
Tap Unbind to deregister the CPW90.
4.
Muting or Unmuting the CPW90
To mute the CPW90 during a call:
Tap
1.
The mute indicator LED illuminates solid red. And the icon
of the IP phone.
To unmute the CPW90 during a call:
Tap
1.
The mute indicator LED illuminates solid green. And the icon
status bar of the IP phone.
Idle Mode
When the CPW90 registers with the IP phone successfully, the CPW90 enters the idle mode. You
can tap
on the CPW90, the battery indicator LED on the CPW90 illuminates solid green for
3 seconds and then goes out.
Viewing CPW90 Information
When the CPW90 is registered with the IP phone, you can view CPW90 status on the IP phone.
Available information of CPW90 includes:
Register Status
Mic Model
MICPOD IPEI
Battery Percent
246
ne
to search for CPW90.
on the CPW90 for 5 seconds.
to mute the call.
again to unmute the call.
appears on the status bar
disappears from the
Hide quick links:
Advertisement
Table of Contents
