Cpw90 Led Instructions - Yealink CP960 User Manual

User Guide for CP960 IP Pho
Connect the micro USB port on the charging cradle to the USB port on the IP phone using
2.
a 0.3m micro USB cable.
During charging, the battery LED indicator on the CPW90 illuminates solid red. When the battery
capacity reaches 100%, the battery LED indicator on the CPW90 will illuminate solid green.
Note If it is the first time you use the CPW90, you need to fully charge the CPW90 for normal use.
If the CPW90 is not in use, we recommend you to charge the CPW90 even when the battery is full.

CPW90 LED Instructions

Mute button indicator LED on the wireless expansion microphone CPW90:
LED Status
Solid green
Slowly flashing red
Solid red
Fast flashing yellow
Slowly flashing yellow
Flashing red and
green alternately
Off
Battery indicator LED on the wireless expansion microphone CPW90:
LED Status
Solid green for one second
and then off
Solid green for 3 seconds
and then off
248
ne
The phone enters the pre-dialing screen.
The phone is in a call an unmuted.
The phone is receiving an incoming call.
The phone is muted.
The CPW90 is in the registration mode.
The CPW90 has registered with the phone, but the CPW90
is out of range.
The CPW90 has registered with the phone, but the CP960 is
turned off.
The phone is searching for the CPW90 which has registered
with it.
The CPW90 is in the idle mode.
The CPW90 is turned on.
The CPW90 is in the idle mode.
Description
Description