Music On Hold - Yealink CP960 User Manual

User Guide for CP960 IP Pho
Your can do the following:
3.
Tap More->Hold to place the current multicast RTP session on hold.

The sender's phone places the multicast RTP session on hold and receiver's phone
releases the session.
To resume the held multicast RTP session, tap
The multicast RTP session is established again.
Tap DND to enable or disable DND mode.

Tap Mute to mute the multicast RTP session, all other participants can hear each

other, but they cannot hear you.
Tap EndCall to cancel the multicast RTP session.

Tap

To stop recording, tap

Music on Hold

Music on hold (MoH) is the business practice of playing recorded music to fill the silence that
would be heard by the party placed on hold. To use this feature, you should specify a SIP URI
pointing to a Music on Hold Server account. When a call is placed on hold, the phone will send a
SIP INVITE message to the Music on Hold Server account. The Music on Hold Server account
automatically answers the SIP INVITE messages and immediately plays audio from some source
located anywhere (LAN, Internet) to the held party. Contact your system administrator for the
SIP URI.
To configure music on hold server via web user interface:
Click on Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
206
ne
to record a call.
.
or tap More->Resume.