Yealink CP960 User Manual page 52

User Guide for CP960 IP Pho
Tap the Show advanced options radio box to configure the HTTP proxy for Browser
-
application.
Tap Connect to connect to the wireless network.
7.
Once the connection is established successfully, the prompt "Connected" appears under
the corresponding SSID.
You can also swipe down from the top of the screen to enter the control center, and toggle
Wi-Fi on. The phone will automatically search for wireless network in your area, and try to
connect the wireless network that you have connected last time. If there are no available
wireless networks or the phone cannot connect the wireless network that you have
connected last time, you will get a notification "
the notification, and then repeat steps 4 to 7 to connect to the desired wireless network.
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks. WPS can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
52
ne
Wi-Fi networks available". You can tap