Semi-Attended Transfer - Yealink CP960 User Manual

Tap
-
Tap
-
and tap the desired contact to complete the transfer. (Remote phone book should be
configured in advance, refer to
information.)
Tap
-
transfer.
The call is then connected to the number to which you are transferring.

Semi-Attended Transfer

Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode via Dsskey is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to
To perform a semi-attended transfer:
Tap More->Transfer during a call.
1.
Do one of the following:
2.
Enter the number you want to transfer the call to.
-
Tap Transfer.
Tap Send to dial out. (The call will automatically dial out in about 5 seconds if you do
not tap Send.)
Tap
-
contact to dial out.
Tap
-
and tap the desired contact to dial out. (Remote phone book should be configured in
advance, refer to
. Search for the contact and tap the desired contact to complete the transfer.
, and then tap
Remote Phone Book
, and then select the desired list. Tap the desired entry to complete the
. Search for the contact and tap the desired contact and tap the desired
, and then tap
Remote Phone Book
-> Remote Phone Book. Search for the contact
on page
Configuring Transfer Mode via DssKey
-> Remote Phone Book. Search for the contact
on page 98 for more information.)
Basic Phone Features
98 for more
on page 183.
161