Using The Onscreen Dial Pad; Phone Status - Yealink CP960 User Manual

If you want to
Delete more characters at a
time.
Replace characters.

Using the Onscreen Dial Pad

Instead of using the onscreen keyboard, you can also use the dial pad on the dialing screen to
enter data. The onscreen dial pad only provide digit keys, # key and * key.
When using the onscreen dial pad, you can tap
Note
information, refer to

Phone Status

You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
General information (IP address, MAC address and firmware version)

Network status (IPv4 status or IPv6 status, IP mode and MAC address)

IPv4 uses a 32-bit address.
-
IPv6 using a 128-bit address which is an updated version of the current Internet
-
Protocol to meet the increased demands for unique IP addresses.
Phone status (product name, hardware version, firmware version, product ID, MAC address,

device certificate status and Android version)
Account status (register status of SIP accounts)

To view the phone status via phone user interface:
Tap Settings from the Home screen.
1.
• Long tap the entered character(s).
Drag /
Tap .
• Long tap
1) Drag your finger to highlight the characters you want to
replace.
2) Tap the desired character.
Using the Onscreen Keyboard
Action
to select the characters you want to delete.
.
to display the onscreen keyboard. For more
on page 40.
Getting Started
45