Yealink CP960 User Manual page 183

Click Confirm to accept the change.
4.
Visual and audio alert features are configurable via web user interface only.
Note
When the monitored line receives an incoming call, the following occurs on your phone:
The phone plays a warning tone (if enabled).

The BLF key icon flashes red.

The caller ID appears on the touch screen (if enabled).

In the following figure, the touch screen shows an incoming call from 6053 on the monitored
line.
You can do the following actions:
Tap DPickup to pick up the call.
-
Tap Dial to dial out the monitored phone number.
-
Tap More->NewCall to place a new call.
-
Tap More->Cancel to exit this screen.
-
Configuring Transfer Mode via DssKey
When there is an active call on the IP phone, you can handle the active call differently
depending on the configuration of the transfer mode via Dsskey with the BLF key.
To configure the transfer mode via Dsskey via web user interface:
Click on Features->Transfer.
1.
Advanced Phone Features
183