Connect A Polycom Video System Using Three Monitors - Polycom Pano Administrator's Manual

Connect a Polycom Video System Using Three
Monitors
You can pair a Polycom Pano system with a Polycom video system using a three-monitor setup that
allows you to display Far video, Far and near content, and Polycom Pano content during a meeting.
Keep the following in mind when using the three-monitor setup:
▪ The monitor that is connected to the Polycom Pano system must be touch-capable.
▪ You will need three HDMI cables and a 4K HDMI splitter for this setup option.
Polycom has tested and recommends an HDMI splitter by CSRET with the following specifications:
▪ 1x2 HDMI Splitter Amplifier Ver 2.0
▪ Certified for 4K x 2K (60Hz) and 3D 1080P
▪ Supports 1 in 2 out signal distribution
You can choose to use a different 4K splitter. If you do, make sure the model has specifications that are
comparable to the CSRET recommended product.
Monitor and System Setup (3 Monitors)
Polycom, Inc.
Sending Content to a Polycom Video System
54