Configure Dns Settings; Configure Lan Options - Polycom Pano Administrator's Manual

Setting
Default Gateway
4. Save your settings.

Configure DNS Settings

You can configure DNS settings in the Polycom
Procedure
1. Configure the following DNS settings in the web interface:
Setting
Server Address 1, Server Address 2,
Server Address 3, Server Address 4
2. Save your settings.

Configure LAN Options

Procedure
1. Configure the following LAN options in the web interface:
Setting
Host Name
Domain Name
Autonegotiation
Polycom, Inc.
Description
Displays the gateway currently assigned to
the system.
If the system does not automatically obtain a
gateway IP address, enter one here.
This setting is configurable only when Enter
IP address manually is selected.
® ™
Pano web interface.
Description
If the system does not automatically obtain a
DNS server address, you can enter one here.
Up to four DNS server addresses are allowed.
If all four address fields show addresses, you
cannot add another.
Description
Indicates the system's name
Displays the domain name currently assigned
to the system.
If the system does not automatically obtain a
domain name, enter one here.
Specifies whether the system should
automatically negotiate the LAN Speed and
Duplex Mode per IEEE 802.3 autonegotiation
procedures. If this setting is enabled, the LAN
Configuring the Network
22