Register A Polycom Pano Device With The Polycom Cloud Service; Enable Screen Mirroring - Polycom Pano Administrator's Manual

Register a Polycom Pano Device with the Polycom
Cloud Service
Registering a Polycom Pano system with the Polycom Cloud Service allows users with the Polycom Pano
App Cloud mode enabled to share content that is stored on an Office 365 OneDrive for Business folder
with the system. Registering a Polycom Pano system also allows you to manage and monitor it from the
Polycom Cloud Service Administration portal.
Procedure
1. Access the web interface by opening a web browser and entering the IP address of the Polycom
Pano system using the format http://IPaddress (for example, https://10.11.12.13).
2. In the Polycom Pano web interface, go to General Settings > Cloud.
3. Select Sign In.
4. Enter the Email ID that was activated through the Polycom Cloud Service Administration portal.
This enables the system to locate your account.
5. Enter your Email ID and Password.
6. Enter a Room Name that users will use to connect to the Polycom Pano device from a smart
device or Polycom Pano App. Polycom recommends that you use a name that is associated with
the location of the system. For example, use the name of the conference room.
7. Keep the automatically generated System Name or enter a new one. This name identifies the
Polycom Pano system in the Polycom Cloud Service portal dashboard.
8. When prmpted, select Finish to complete the setup process.
Related Links
Modes of Operation on page 14
Polycom Cloud Service Administration Portal

Enable Screen Mirroring

You can enable the screen mirroring features that users connect to and share content. The enabled
features are presented on the Polycom Pano home screen connection animation.
Note: The Polycom Pano system does not automatically enable the screen mirroring options when you
enable the wireless settings.
Procedure
1. Access the web interface by opening a web browser and entering the IP address of the Polycom
Pano system using the format https://IPaddress (for example, https://10.11.12.13).
2. In the Polycom Pano web interface, go to General Settings > Screen Mirroring
3. Select Enable AirPlay.
Polycom, Inc.
on page 39
Configuring General System Settings
18