Polycom Pano Administrator's Manual page 17

2. Plug in the power source to power on the device. A URL is displayed on the screen.
3. Using a PC or mobile device, open a browser and enter IP address of the system using the format
https://IPaddress (for example, https://10.11.12.13).
4. The system is associated with a default admin username and password. You must change the
default password during the initial setup process. If necessary, select the password visiblity icon
to hide or reveal the password.
5. Optionally, select the Change username checkbox to display an additional field for providing a
new username.
6. Select a language for the system.
7. Select the country where the system is located.
8. The Polycom Cloud Service registration page appears. Select Sign In to register your system
using the Polycom Cloud Service or Skip to continue to the next step and set up the Polycom
Pano system as a standalone system: Enter the Email ID that was activated through the Polycom
Cloud Service portal. This enables the system to locate your account. Enter your Email ID and
Password.
9. Enter a Room Name that users will use to connect to the Polycom Pano system from a smart
device or Polycom Pano App. Polycom recommends that you use a name that is associated with
the location of the system. For example, use the name of the conference room.
10. Keep the automatically generated Device Name or enter a new one. This name identifies the
Polycom Pano device in the Polycom Cloud Service portal dashboard.
11. When prompted, select Finish. The system will restart to complete the setup process.
Polycom, Inc.
Running the Setup Wizard
15