Securing The System; Security Settings In The Web Interface; Manage System Access; Set Local Account Details - Polycom Pano Administrator's Manual

Securing the System

Topics:
▪

Security Settings in the Web Interface

▪

Manage System Access

▪

Set Local Account Details

▪ Disable the Security Code
▪ Manage Wireless Communication Options
For detailed information about configuring security settings, see the following topics.
Security Settings in the Web Interface
To configure your Polycom Pano system security settings using the system web interface, use one of the
following supported browsers with cookies enabled:
▪ Google Chrome ™ 46.0.2490.86
▪ Mozilla ® Firefox ® 42.0
® ®
▪ Apple Safari 9
▪ Microsoft Edge (all versions)
Note: A message is displayed when you attempt to access the web interface using a browser with
cookies disabled. This message does not appear for Microsoft Edge browsers.
You access the web interface from a web browser and enter the IP address of the Polycom Pano system
using the format https://IPaddress (for example, https://10.11.12.13).
For more information about using the web interface, refer to Access the System Web Interface.
Caution: The HTTPS protocol ensures that the configuration of all login information is transmitted using
an encrypted channel, including those user names and passwords used to communicate with
third-party systems on your network. Using HTTPS severely limits the ability of anyone on the
network to discover these credentials. For this reason, all attempts to use the Polycom Pano
web interface via HTTP are redirected to the HTTPS interface.
Manage System Access
You can configure system access options.
Set Local Account Details
You set up the Admin ID and password during out-of-box setup. You can change these values in the web
interface.
Polycom, Inc. 27