Set Device And Room Names - Polycom Pano Administrator's Manual

2. In the Polycom Pano web interface, go to General Settings > Date Time.
3. Configure these settings:
Setting
Time Format
Auto Adjust for Daylight Saving Time
Time Zone
Time Server
Primary Time Server Address
Secondary Time Server Address
Current Date and Current Time

Set Device and Room Names

You can set the device and room names associated with a standalone Polycom Pano system using the
web interface. You must use the Polycom Cloud Service Administration portal to change the room name
of systems that are registered with the Polycom Cloud Service.
Procedure
1. Access the web interface by opening a web browser and entering the IP adddress of the Polycom
Pano system using the format https://IPaddress (for example, IPaddress).
2. In the Polycom Pano web interface, go to General Settings > Device and Room Name.
3. Enter values in the System Name or Room Name fields.
4. Select Save.
Polycom, Inc.
Configuring General System Settings
Description
Specifies how the time is displayed in the
interface.
Specifies the daylight saving time setting.
When you enable this setting, the system
clock automatically changes for daylight
saving time.
Specifies the time difference between GMT
(Greenwich Mean Time) and your location.
Specifies whether the connection to a time
server is automatic or manual for system time
settings. You can also select Off to enter the
date and time yourself.
Specifies the address of the primary time
server to use when Time Server is set to
Manual.
Specifies the address of the time server to use
when the Primary Time Server Address
does not respond. This is an optional field.
If Time Server is set to Manual or Auto,
these settings are not displayed.
If Time Server is set to Off, Current Date and
Current Time are configurable.
17