Polycom Pano Administrator's Manual page 36

Procedure
1. Access the web interface by opening a web browser and entering the IP address of the Polycom
Pano system using the format https://IPaddress (for example, https://10.11.12.13).
2. Select General Settings > Software Update.
3. Select Check for updates.
4. Select Update.
Automatically Update Software
You can automatically update Polycom Pano software from the Polycom server
Procedure
1. Access the web interface by opening a web browser and entering the IP address of the Polycom
Pano system using the format https://IPaddress (for example, https://10.11.12.13).
2. Select General Settings > Software Update.
3. To make automatic updates and update your software to the latest build on the server, select
Enable automatic updates. An additional field appears for you to specify the IP address of the
update server. You also have the option to specify that updates occur within a specific time range.
4. Enter the Update Server Address in the space provided.
5. Optionally, select Only check for updates during maintenance hours to specify a range of time
to automatically update the software. When the date fields appear, select the desired time. Your
changes are automatically saved. After the Maintenance hours begin and Maintenance hours
end are configured, the Polycom Pano system calculates a random time within the defined update
window at which to check for updates. It then checks for updates at this time on a daily basis as
long as the Maintenance hours begin and Maintenance hours end values do not change. If the
values change, a new random time within the new time window is calculated.
Disable System Software Updates from the Polycom Cloud Service
When you register a system to the Polycom Cloud Service, automatic software updates are enabled by
default. You can disable automatic software updates for a Polycom Pano system that is registered with
the Polycom Cloud Service using the web interface.
Procedure
1. Access the web interface by opening a web browser and entering the IP address of the Polycom
Pano device using the format https://IPaddress (for example, https://10.11.12.13).
2. Go to General Settings > Software Update.
3. To make automatic updates and update your software to the latest build on the server, select
Enable automatic updates. An additional field appears for you to specify the IP address of the
update server. You also have the option to specify that updates occur within a specific time range
4. Enter the Update Server Address in the space provided.
5. Optionally, select Only check for updates during maintenance hours to specify a range of time
to automatically update the software. When the date fields appear, select the desired time. Your
changes are automatically saved. After the Maintenance hours begin and Maintenance hours
end values are configured, the Polycom Pano system calculates a random time within the defined
update window at which to check for updates. It then checks for updates at this time on a daily
Polycom, Inc.
System Maintenance
34