Mount The System On A Table; Mount The System On A Wall - Polycom Pano Administrator's Manual

3. Connect the LAN cable to the Polycom Pano system for network connectivity, or as a PoE+ power
source.
4. Optionally, connect a power adapter to the Polycom Pano system.

Mount the System on a Table

You can mount the Polycom Pano system on a tabletop, such as a desk or shelf.
Procedure
1. Place the system on the table.
2. Position the system cables so that they are kept neatly in place and away from heavy foot traffic to
prevent accidental cable disconnections or damage.

Mount the System on a Wall

You can mount the Polycom Pano system on a wall.
Polycom, Inc.
Setting Up System Hardware
11