Polycom Pano Administrator's Manual page 23

Setting
Your IP Address
Default Gateway
Subnet Mask
3. Configure the following IPv6 settings:
Setting
Enable IPv6
Enable SLAAC
Link-Local
Site-Local
Global Address
Polycom, Inc.
Description
Displays the system IP address.
If you need to create a static address, enter it
here.
This field is disabled when the IP Address
field is set to Obtain IP Address
automatically.
Displays the gateway currently assigned to
the system.
If you need to create a static address, enter it
here.
This field is disabled when the IP Address
field is set to Obtain IP Address
automatically.
Displays the subnet mask currently assigned
to the system.
If you need to create a static address, enter it
here.
This field is disabled when the IP Address
field is set to Obtain IP Address
automatically.
Description
Enables the IPv6 network stack and makes
the IPv6 settings available.
Specifies whether to use stateless address
autoconfiguration (SLAAC) instead of DHCP
to automatically obtain an IP address.
Displays the IPv6 address used for local
communication within a subnet.
This setting is configurable only when Enter
IP address manually is selected.
Displays the IPv6 address used for
communication within the site or organization.
This setting is configurable only when Enter
IP address manually is selected.
Displays the IPv6 Internet address.
This setting is configurable only when Enter
IP address manually is selected.
Configuring the Network
21