Polycom Pano Administrator's Manual page 52

Keep the following in mind:
▪ Polycom recommends that you do not display the IP address on the Polycom video system local
interface. This will prevent users with personal devices from attempting to use the IP address of the
Polycom video system to connect to the Polycom Pano system.
▪ Polycom recommends that you create a printout with the Polycom Pano connection information
(device name, security code, and enabled connection methods) for users who want to connect a
personal device to share content. Alternatively, you can go to the web interface for the Polycom
video system and select the Content, then Near monitor profile to view the Polycom Pano system.
Procedure
1. Make sure the Polycom Pano systerm is running the latest software.
2. Connect one end of an HDMI cable to the HDMI In port on the Polycom Pano monitor. Connect
the other end to an HDMI Out port on the Polycom video system.
3. Connect one end of an HDMI cable to the HDMI In port on the Polycom video system. Connect the
other end to the HDMI Out port on the Polycom Pano system.
4. Open a web browser and enter the IP address of the Polycom video system.
5. Set up the monitor profiles for the Polycom video system monitor:
a. Open a web browser and enter the IP address of the Polycom video system.
Polycom, Inc.
Sending Content to a Polycom Video System
50