Example 1 - Network Topology For Dynamic Dhcp Server; Configuration Of Static Dhcp Server - Advantech B+B SmartWorx LR77 v2 Configuration Manual

Item Description
Enable static Select this option to enable a static DHCP server.
DHCP leases
MAC Address MAC address of a DHCP client.
IP Address Assigned IP address.
Table 16: Configuration of Static DHCP Server
Do not to overlap ranges of static allocated IP addresses with addresses allocated by the
dynamic DHCP server. IP address conflicts and incorrect network function can occur if
you overlap the ranges.
Example 1: Configure the network interface to connect to a dynamic DHCP server:
The range of dynamic allocated addresses is from 192.168.1.2 to 192.168.1.4.
The address is allocated 600 second (10 minutes).
Figure 11: Example 1 – Network Topology for Dynamic DHCP Server
3. CONFIGURATION
21