Backup Routes Configuration; Backup Routes - Advantech B+B SmartWorx LR77 v2 Configuration Manual

Lte
Hide thumbs Also See for B+B SmartWorx LR77 v2:
Table of Contents

Advertisement

Item
Description
Enable backup
The default route is selected according to the settings below. If dis-
routes switching
abled (unchecked), the backup routes system operates in the back-
ward compatibility mode based on the default priorities of the network
interfaces (listed below).
Mode
To add the network interfaces to the backup routes system, mark the checkbox(s) of the
following interface options: Enable backup routes switching for Mobile WAN, Enable backup
routes switching for PPPoE, Enable backup routes switching for WiFi STA, Enable backup
routes switching for Primary LAN or Enable backup routes switching for Secondary LAN. En-
abled interfaces are then used for WAN access either in Single WAN mode (only one interface
at a time) or in Multiple WANs mode (multiple interfaces at a time), based on priorities set:
Item
Priority
Ping IP Address
Ping Interval
Attention! If you want to use a mobile WAN connection as a backup route, you must
choose the enable + bind option in the Check Connection item on the Mobile WAN page
and fill in the ping address. See chapter 3.3.1.
Single WAN – The default mode. Only one interface is used for
WAN communication at a time. Other interfaces are used for
WAN when the preferred interface fails, based on the priorities
set.
Multiple WANs – Multiple interfaces can be used for WAN con-
nection. When WAN communication via multiple interfaces is
received, the same interface is used in reply, therefor; the traf-
fic will stay on the given interface. The set priorities are used
when transmitting data from the router or from the network be-
hind the router. The highest priority interface is used for these
transmissions.
Table 29: Backup Routes Configuration
Description
Priority for the type of connection (network interface).
Destination IP address or domain name of ping queries to check
the connection.
The time interval between consecutive ping queries.
Table 30: Backup Routes
47
3. CONFIGURATION

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B+b smartworx ur5i v2

Table of Contents