Sms Configuration; Control Via Sms - Advantech B+B SmartWorx LR77 v2 Configuration Manual

Item
BIN1 – SMS
BIN2 – SMS
BIN3 – SMS
BIN4 – SMS
After you enter a phone number in the Phone Number 1 field, the router allows you to
configure the control of the device using an SMS message. You can configure up to three
numbers for incoming SMS messages. To enable the function, mark the Enable remote control
via SMS check box. The default setting of the remote control function is active. Note: Every
received control SMS is processed and then deleted from the router.
Item
Phone Number 1
Phone Number 2
Phone Number 3
If you leave the phone number field blank, then you can restart the router using an
SMS Reboot message from any phone number.
If you enter one or more phone numbers, then you can control the router using SMS
messages sent only from the specified phone numbers.
If you enter the wild card character , then you can control the router using SMS
messages sent from any phone number.
Continued from previous page
Description
SMS text messages when activate the binary input on
the expansion port.
SMS text messages when activate the binary input on
the router.
SMS text messages when activate the binary input on
the router.
SMS text messages when activate the binary input on
the router.
Table 56: SMS Configuration
Description
Specifies the first phone number allowed to access the router us-
ing an SMS.
Specifies the second phone number allowed to access the router
using an SMS.
Specifies the third phone number allowed to access the router
using an SMS.
Table 57: Control via SMS
88
3. CONFIGURATION