Snmp Configuration - Mbus Extension; Snmp Configuration - R-Seenet - Advantech B+B SmartWorx LR77 v2 Configuration Manual

In addition, you can continue with this configuration:
Activating the Enable I/O extension function allows you monitor the binary I/O inputs on
the router.
Selecting the Enable XC-CNT extension lets you monitor the expansion port CNT inputs
and outputs status.
Selecting Enable M-BUS extension and entering the Baudrate, Parity and Stop Bits lets
you monitor the meter status connected to the expansion port MBUS status.
Item Description
Baudrate Communication speed
Parity Control parity bit:
Stop Bits Number of stop bits.
Table 50: SNMP configuration – MBUS extension
Parameters Enable XC-CNT extension and Enable M-BUS extension cannot be checked
at the same time.
Selecting Enable reporting to supervisory system and entering the IP Address and Period
lets you send statistical information to the monitoring system, R-SeeNet.
Item Description
IP Address IP address
Period Period of sending statistical information (in minutes).
none – Data will be sent without parity.
even – Data will be sent with even parity.
odd – Data will be sent with odd parity.
Table 51: SNMP Configuration – R-SeeNet
80
3. CONFIGURATION