Configuration; Lan Configuration - Advantech B+B SmartWorx LR77 v2 Configuration Manual

3. Configuration
3.1 LAN Configuration
To enter the Local Area Network configuration, select the LAN menu item in the Configu-
ration section. The Primary LAN subitem is for the router's main Ethernet interface (ETH). If
the router has additional Ethernet ports (PORT1 or PORT2), they are configured using the
Secondary LAN subitem. For routers with two additional Ethernet ports, PORT1 and PORT2
are automatically bridged together.
Item Description
DHCP Client Enables/disables the DHCP client function.
IP address Specifies a fixed set of IP addresses for the network interfaces ETH.
Subnet Mask Specifies a Subnet Mask for the IP address.
Bridged Activates/deactivates the bridging function on the router.
Media type Specifies the type of duplex and speed used in the network.
disabled – The router does not allow automatic allocation IP ad-
dress from a DHCP server in LAN network.
enabled – The router allows automatic allocation IP address from
a DHCP server in LAN network.
no – The bridging function is inactive (default).
yes – The bridging function is active.
Auto-negation – The router automatically sets the best speed
and duplex mode of communication according to the network's
possibilities.
100 Mbps Full Duplex – The router communicates at 100Mbps,
in the full duplex mode.
100 Mbps Half Duplex – The router communicates at 100Mbps,
in the half duplex mode.
10 Mbps Full Duplex – The router communicates at 10Mbps, in
the full duplex mode.
10 Mbps Half Duplex – The router communicates at 10Mbps, in
the half duplex mode.
19
3. CONFIGURATION
Continued on next page