Ntp Configuration; Example Of Ntp Configuration - Advantech B+B SmartWorx LR77 v2 Configuration Manual

3.16 NTP Configuration
The NTP configuration form allows you to configure the NTP client. To open the NTP page,
click NTP in the Configuration section of the main menu. NTP (Network Time Protocol) allows
you to periodically set the internal clock of the router. The time is set from servers that provide
the exact time to network devices.
If you mark the Enable local NTP service check box, then the router acts as a NTP server
for other devices in the local network (LAN).
If you mark the Synchronize clock with NTP server check box, then the router acts as a
NTP client. This means that the router automatically adjusts the internal clock every 24
hours.
Item
Primary NTP Server
Address
Secondary NTP
Server Address
Timezone
Daylight Saving Time
The figure below displays an example of a NTP configuration with the primary server set
to ntp.cesnet.cz and the secondary server set to tik.cesnet.cz and with the automatic change
for daylight saving time enabled.
Description
IP or domain address of primary NTP server.
IP or domain address of secondary NTP server.
Specifies the time zone where you installed the router.
Activates/deactivates the DST shift.
No – The time shift is inactive.
Yes – The time shift is active.
Table 47: NTP Configuration
Figure 45: Example of NTP Configuration
78
3. CONFIGURATION