Network Status; Description Of Information In Network Status - Advantech B+B SmartWorx LR77 v2 Configuration Manual

Item Description
TX
collisions Number of collisions on physical layer
txqueuelen Length of front network device
RX bytes Total number of received bytes
TX bytes Total number of transmitted bytes
Table 12: Description of Information in Network Status
You may view the status of the mobile network connection on the network status screen.
If the connection to the mobile network is active, it will appear in the system information as an
usb0 interface. The Route Table is displayed at the bottom.
For the XR5i v2 routers, interface ppp0 indicates the PPPoE connection.
Continued from previous page
packets – transmit packets
errors – number of errors
dropped – dropped packets
overruns – outgoing packets lost because of overload
carrier – wrong outgoing packets with errors resulting from the
physical layer
Figure 5: Network Status
13
2. STATUS