Openvpn Configuration - Advantech B+B SmartWorx LR77 v2 Configuration Manual

Item
DH Parameters
Local Certificate
Local Private Key
Username
Password
Extra Options
There is a condition for tunnel to be established: WAN route has to be active (for example
mobile connection established) even if the tunnel does not go through the WAN.
Continued from previous page
Description
Specifies the protocol for the DH parameters key exchange which
you can use for X.509 Certificate authentication in the server
mode.
Specifies the certificate used in the local device. You can use this
authentication certificate for the X.509 Certificate authentication
mode.
Specifies the key used in the local device. You can use the key
for the X.509 Certificate authentication mode.
Specifies a login name which you can use for authentication in
the username/password mode.
Specifies a password which you can use for authentication in the
username/password mode.
Specifies additional parameters for the OpenVPN tunnel, such as
DHCP options. The parameters are proceeded by two dashes.
For possible parameters see the help text in the router using SSH
– run the openvpnd --help command.
Table 36: OpenVPN Configuration
60
3. CONFIGURATION