Reboot; Control Sms; Send Sms On The Serial Port - Advantech B+B SmartWorx LR77 v2 Configuration Manual

Control SMS messages do not change the router configuration. For example, if the router is
changed to the off line mode using an SMS message, then the router remains in this mode.To
return the router to the on-line mode, reboot or power cycle the device. The behavior is the
same for every SMS control message.
To control the router using an SMS, send only message text containing the control com-
mand. You can send control SMS messages in the following form:
SMS
go online sim 1
go online sim 2
go online
go offline
set out0=0
set out0=1
set out1=0
set out1=1
set profile std
set profile alt1
set profile alt2
set profile alt3

reboot

get ip
Choosing Enable AT-SMS protocol on expansion port 1 and Baudrate makes it possible to
send/receive an SMS on the serial Port 1.
Item Description
Baudrate Communication speed on the expansion port 1
Choosing Enable AT-SMS protocol on expansion port 2 and Baudrate makes it possible to
send/receive an SMS on the serial Port 2.
Item Description
Baudrate Communication speed on the expansion port 2
Description
The router changes to SIM1 (APN1)
The router changes to SIM2 (APN2)
Changes the router to the online mode
Changes the router to the off line mode
Sets the binary output to 0
Sets the binary output to 1
Sets the binary output of XC-CNT to 0
Sets the binary output of XC-CNT to 1
Sets the standard profile
Sets the alternative profile 1
Sets the alternative profile 2
Sets the alternative profile 3
The router reboots
The router responds with the IP address of the SIM card
Table 58: Control SMS
Table 59: Send SMS on the serial Port 1
Table 60: Send SMS on the serial Port 2
89
3. CONFIGURATION