APRILIA RSV4 R Service Station Manual page 384

Suspensions
•
Adjust the preloading of the steering
bearings by tightening the lower ring
nut to the prescribed torque.
•
Turn the steering 3-4 times completely
from right to left and then check correct
tightening torque of such ring nut.
•
Place the safety washer, bending two
opposite tongues inside the ring nut
notches.
•
Mount the upper ring nut and tighten it
manually (maximum 90 degrees) so
that the grooves match the safety
washer tongues.
•
Rivet the tongues on the upper ring nut.
•
Fit the upper fork plate.
SUSP - 384
RSV4 R