Removing Protection Materials - Canon iPF9000 series Service Manual

3.1.2.7 Removing Protection Materials

iPF9000 / iPF9000S / iPF9100
1) Remove the tape and other packaging material used to secure the printer.
2) Open the upper cover.
3) Lift the release lever [1] [A], remove the protective sheet [2] from the platen, and lower the release lever again [B].
4) Remove the screw and remove the belt stopper [1], and then remove the carriage spacer [2] pulling out toward the arrow direction.
F-3-57
F-3-58
[2]
[B]
F-3-59
[A]
[1]
Chapter 3
0014-2030
3-27