Canon iPF9000 series Service Manual page 64

Chapter 1
[System Setup]
[Warning]
[Keep Media Size]
[Paper Size Basis]
[Noz. Check Freq.]
[Sleep Timer]
[Length Unit]
[Time Zone]
[Date Format]
[Date & Time]
[Language]
[Contrast Adj.]
[Reset PaprSetngs]
[Erase HDD Data]
[Information]
[System Info]
[Error Log]
[Job Log]
[HDD Information]
1-48
Setting Item
[Buzzer]
[Detect Mismatch]
[Skip Take-Up Err]
[Sht Selection 1]
[Sht Selection 2]
[Date]
[Time]
Setting Item
[Firmware]
[Boot]
[MIT]
[s/n:]
[IP]
[########-####]
(Choose from information [Document Name]
about the latest three print
[User Name]
jobs.)
[Page Count]
[Job Status]
[Print Start Time]
[Print End Time]
[Print Time]
[Print Size]
[Media Type]
[Interface]
[Ink Consumed]
[HDDSpace:]
Description, Instructions
Set the buzzer. Choose On for the buzzer to sound once for warnings and three times
for errors.
Choose On to continue with printing even if the paper type and size settings are
different in the printer menu and printer driver. Choose Off to have the printer pause
before printing if the paper type specified in the printer menu does not match the
paper type in the printer driver. In this case, you can continue printing by pressing
the Online button.
Choose On to continue with printing even if an error occurs with the Media Take-up
Unit. Choose Off to have the printer pause before printing if a rewinding error
occurs.
Choose On to use the paper size setting as the basis for printing instead of other
settings. The margin setting of the printer menu will be used instead of the margin
setting of the printer driver if the latter is smaller, which may prevent text or images
in the margin from being printed.
Choose Off to use the printer driver settings instead. Even if the margin setting of
the printer driver is smaller than that of the printer driver, text or images will not be
cut off. However, this requires longer paper because the actual margin will be equal
to the margin setting of the printer driver plus the margin setting of the printer menu.
If sheet size detection is activated, choose whether ISO A3+ or ANSI B Super is
applied when an intermediate size is detected.
If sheet size detection is activated, choose whether ISO B1 or ANSI F is applied
when an intermediate size is detected.
Specify the timing for automatic checks of nozzle clogging. Choose 1 page to check
once per printed page. Choose 10 pages to check once per ten printed pages. Choose
Automatic to have the printer automatically adjust the timing for checks based on
the frequency of nozzle use.
Specify the period before the printer enters Sleep mode.
Choose the unit of measurement when roll length is displayed. You can switch the
unit displayed for Roll Length Set and the remaining paper amount displayed in the
submenu.
Specify the time zone. Time zone options indicate a main city in this time zone and
the difference from Greenwich Mean Time.
Specify the date format.
Set the current date.
Set the current time.
Specify the language used on the Display Screen.
Adjust the Display Screen contrast level.
Restores settings that you have changed with Media Configuration Tool to the
factory default values.
Erase all data on the hard disk.
Description, Instructions
Displays the version of the printer and firmware.
Displays the version of the boot ROM.
Displays the version of the MIT database format.
Displays the printer's serial number.
Displays the printer's IP address.
Displays the most recent error messages (up to two).
Displays the document name in the last print job.
Displays the name of the user who sent the print job.
Displays the number of pages in the print job.
Displays the results of the print job processed.
Displays the time when the print job was started.
Displays the time when the print job was finished.
Displays the time required to print the job.
Displays the paper size in the print job.
Displays the paper type in the print job.
Displays the interface used for the print job.
Displays the ink consumption.
Displays the space available on the printer's hard disk.