Details Of Service Mode - Canon iPF9000 series Service Manual

7.1.6 Details of Service Mode

iPF9000S
This section provides details of the Service mode menu.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When a roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
Display
S/N
TYPE
LF TYPE
TMP
SIZE LF
SIZE LF
SIZE CR
SIZE CR
3) HEAD
Displays the following EEPROM information of the printhead.
S/N R
S/N L
LOT R
LOT L
4) INK
Displays the numbers of days passed since installation of the following ink tanks.
Display
BK
MBK
C
M
Y
PC
PM
GY
5) WARNING
Displays the warning history (up to 20 events). The newest event has the smallest history number.
6) ERROR
Displays the error history (up to 20 events). The newest event has the smallest history number.
7) INK CHECK
Displays the history of execution of turning off the remaining ink level detection (by using the refilled ink tank) in the order of PC, C, PM, Y, GY, BK, MBK, and M.
0: No execution
1: Executed at least once
Serial number of printer
Type setting on main controller PCB
* iPF9100/9000S/9000 is represented by 60.
Feed roller type: 0 or 1
Ambient temperature
Detected size of loaded media (feed direction)
0 is always detected for the roll media.
Detected size of loaded media (feed direction)
0 is always detected for the roll media.
Detected size of loaded media (carriage scan direction)
Detected size of loaded media (carriage scan direction)
Display
Serial number of printhead R
Serial number of printhead L
Lot number of printhead R
Lot number of printhead L
Number of days passed since the BK ink tank was installed
Number of days passed since the MBK ink tank was installed
Number of days passed since the C ink tank was installed
Number of days passed since the M ink tank was installed
Number of days passed since the Y ink tank was installed
Number of days passed since the PC ink tank was installed
Number of days passed since the PM ink tank was installed
Number of days passed since the GY ink tank was installed
T-7-50
Description
T-7-51
Description
T-7-52
Description
Chapter 7
Unit
-
-
-
degrees C
mm
inch
mm
inch
Unit
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
0017-8457
7-33