When The Ink Tank Is Replaced.); Printhead); A/03830109-252B/03830108-252C Ink Tank Is Not Installed. ( This Error Occurs When The Ink Tank Is Replaced.) - Canon iPF9000 series Service Manual

<Countermeasure>
1) Replace the ink tank.
2) Replace the ink tank unit.
3) Replace the main controller PCB.
6.1.3.16 03830104-2520/03830101-2521/03830102-2522/03830103-2523/03830112-2524/03830113-2525/03830106-2526/
03830105-2528/03830115-2529/03830107-252A/03830109-252B/03830108-252C Ink tank is not installed. ( This error
occurs when the ink tank is replaced.)
iPF9000
<Cause>
When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed.
<Probable fault location>
Operation method, ink tank, ink tank cover switch, ink tank unit, or main controller PCB
<Countermeasure>
1) Operation check
Install the ink tank correctly.
2) Visual check
Remove foreign substances from the ink tank contacts and ink tank cover switch if any.
3) Replace the ink tank.
4) Ink tank cover switch
Check for normal operation. If the operation is abnormal, replace the ink tank cover switch.
5) Replace the ink tank unit.
6) Replace the main controller PCB.
6.1.3.17 03800204-2540/03830201-2541/03830202-2542/03830203-2543/03830212-2544/03830213-2545/03830206-2546/
03830205-2548/03830215-2549/03830207-254A/03830209-254B/03830208-254C Invalid ink tank ID
iPF9000
<Cause>
The installed ink tank is wrong.
<Probable fault location>
Operation method, Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1) Operation check
Install the ink tank correctly.
2) Replace the ink tank.
3) Replace the ink tank unit.
4) Replace the main controller PCB.
6.1.3.18 03830304-2560/03830301-2561/03830302-2562/03830303-2563/03830312-2564/03830313-2565/03830306-2566/
03830305-2568/03830305-2568/03830315-2569/03830307-256A/03830309-256B/03830308-256C Ink tank EEPROM error
iPF9000
<Cause>
An ink tank EEPROM checksum error was detected.
<Probable fault location>
Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1) Replace the ink tank.
2) Replace the ink tank unit.
3) Replace the main controller PCB.
6.1.3.19 03810204-2570/03810201-2571/03810202-2572/03810203-2573/03810212-2574/03810213-2575/03810206-2576/
03810205-2578/03810215-2579/03810207-257A/03810209-257B/03810208-257C Ink low error (occurs when replacing the

printhead)

iPF9000
<Cause>
The printhead was replaced when the levels of remaining ink was level one.
<Probable fault location>
Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1) Replace the ink tank.
2) Replace the ink tank unit.
3) Replace the main controller PCB.
Chapter 6
0013-7166
0013-7169
0013-7172
0013-7174
6-7