Table of Contents
Advertisement
Chapter 3
8) Fold back the flaps of the stand support cardboard as shown, and then remove the stand support cardboard by collapsing it.
9) While holding the printer and stand in a group of four persons (two persons on each side), turn the printer forward until it stands upright (using the rear ends of
the stand legs L and R as the fulcra). Be extremely careful not to allow the stand to skid.
10) Remove the black packing belts from the printer, remove the package containing the cushioning materials and media take-up spool, and remove the antiskid
materials from the casters.
b) Installing the printer with it lifted (in a group of six persons)
1) Remove the black packing belts from the printer and remove the upper cushioning materials.
3-16
F-3-33
F-3-34
F-3-35
F-3-36
Advertisement
Table of Contents
Troubleshooting
