Canon iPF9000 series Service Manual page 254

Chapter 4
11) Release carriage belt from the pulley of the carriage motor.
12) Remove two screws [1] and pulley base [2].
13) Remove screw [3] and the connector to release head management sensor [4].
14) Remove five screws [5] and lift unit [6].
15) Remove the cutter unit, and lay the caterpillar of the ink tube unit on its side, and then remove the carriage from the right side of the printer.
4-16
[4]
F-4-31
[5]
[3]
[4]
[6]
F-4-32
[3]
[2]
[1]
[2]
[1]
[6]
[7]