Canon iPF9000 series Service Manual page 188

Chapter 3
6) Attach leg covers to stand legs L and R. Insert the protruding portion [1] of each leg cover in the groove [2] in the stand upper stay, and insert the protruding
portions [3] of the leg cover in the grooves [4] in the stand lower stay.
7) Secure the leg covers to the stand legs L and R using M4 hex screws.
When installing the printer with it turned over (in a group of four persons), do not remove the antiskid materials from the stand casters.
3-12
[2]
[1]
[4]
[3]
F-3-21
F-3-22
[1]
[2]
[4]
[3]