The media take-up unit takes up roll media, ranging in width from 17 to 60 inches, on a 2 or 3-inch paper tube in roll form after they are printed by the host computer.

Taking up begins automatically when a sensor attached to the bottom of the stand detects a roll delivered after printing falling down due to the weight of a weight

roller.

Rolls may also be manually taken up by using a button on the media take-up unit.

The media take-up unit has an overload protection feature to prevent accidents while taking up rolls. (The feature will shut down the motor automatically when an

overload occurs while taking up a roll.)

Additional features of the media take-up unit include:

- An adapter may be installed to support a 3-inch paper tube.

- Rolls can be rewound by feeding them backward to visually check images.

- Weight rollers varying in length to suit specific roll widths ensure added takeup efficiency.

- The printer detects errors in the media take-up unit by itself.

- Linked with the printer's sleep mode.

[1]

Weight

This weight consists of weight roll(7 pcs.)[1], weight flange(2 sets)[2] and weight joint[3].

[5]

[2]