Backing Up, Restoring, Or Replicating The Oracle Ilom Firmware Configuration - Oracle X4 series Administration Manual

This procedure provides web and command-line interface (CLI) instructions for the server
service processor (SP).
To identify the sync status or to manually sync the host BIOS configuration with
Oracle ILOM:
From the Web interface:
■
a.
b.
From the CLI:
■
■
■
Performing BIOS Configuration Tasks, Oracle ILOM Configuration and Maintenance
See Also ■
Guide for firmware version 3.1 or 3.2.
For BIOS screen details, see your server service manual.
■
Backing Up, Restoring, or Replicating the Oracle ILOM
Firmware Configuration
When the Oracle Integrated Lights Out Manager (ILOM) firmware configuration changes on an
Oracle server service processor (SP) or chassis monitoring module (CMM), use Oracle ILOM
to do the following:
Back up the Oracle ILOM configuration to prevent the loss of the current working
■
configuration settings. For more details, see
Configuration (Oracle ILOM)" on page

Backing Up, Restoring, or Replicating the Oracle ILOM Firmware Configuration

Click System Management > BIOS.
Perform one or both of the steps below:
To view the current sync status, locate the Configuration Sync Status field at the
■
top of the page.
To sync the host BIOS settings with Oracle ILOM, power cycle the host system
■
by clicking Host Management > Power Control > Power Cycle.
To view the current sync status, type:
show /System/BIOS/Config
To manually sync the host BIOS settings with Oracle ILOM, type:
reset /System
Backing Up and Restoring Firmware Configurations and BIOS Settings
"Back Up the Current Oracle ILOM Firmware
136.
135