Replace Oracle System Assistant And Update The Firmware Files On The Oracle System Assistant Usb Drive (Bios) - Oracle X4 series Administration Manual

Replace Oracle System Assistant and Update the Firmware Files on the Oracle System Assistant USB Drive (BIOS)

Replace Oracle System Assistant and Update the
Firmware Files on the Oracle System Assistant
USB Drive (BIOS)
This procedure replaces the Oracle System Assistant application, and places the latest versions
of the firmware and drivers on the USB drive so that they are available to be installed. It does
not install the updated firmware and drivers.
To install the updated firmware and drivers, see
Firmware (Oracle ILOM)" on page
You can use this procedure to replace Oracle System Assistant on a server that is not connected
to the network.
Obtain a copy of the ORACLE SYSTEM ASSISTANT UPDATER patch. For details,
1.
see "Getting Firmware and Software From MOS" on page
If the server you are updating is not connected to the network, after you get the bootable updater
ISO file, make it available to the server using a CD/DVD drive, network location, or USB drive.
Configure BIOS to boot from the updater ISO file.
2.
For details, see "Access the BIOS Setup Utility" on page
3. Boot from the updater ISO file.
The server boots from the updater ISO file.
Follow the prompts to complete the installation.
4.
This installs new version of Oracle System on your server and updates the firmware, software,
and driver files on the Oracle System Assistant USB drive.
To install the updated firmware, sofrware, and drivers, see
(Oracle System Assistant)" on page
"Update BIOS and SP Firmware or CMM
229.
48.
"Update Software and Firmware
226.
Downloading and Updating System Firmware and Software
233.
221