Table of Contents
Advertisement
Oracle System Assistant Known Issues
System Assistant, and you can only enable it and bring it back online using the server BIOS
Setup Utility.
Oracle System Assistant launches if it is installed in the server, it is enabled in the BIOS
■
Setup Utility, and it is not corrupted.
If Oracle System Assistant becomes corrupted, you can recover the Oracle System Assistant
■
image, provided it was initially installed on your server.
Oracle System Assistant Known Issues
This section describes known issues with Oracle System Assistant.
Oracle System Assistant Does Not Provide
Complete Support for Oracle VM 3.3.1 Installation
(19870207, 19870253)
If you use Oracle System Assistant to install Oracle VM 3.3.1, the network and boot loader
configuration screens do not appear during the installation process. The boot loader default
values are applied to the installation.
Workaround
Do one of the following:
If you want to configure the network and boot loader during installation, use a different
■
method to install Oracle VM 3.3.1.
If you wish to accept default boot loader values, install Oracle VM 3.3.1 using Oracle
■
System Assistant with one of the following methods:
■
■
178
Oracle X4 Series Servers Administration Guide • April 2016
Use the network-based installation method, which will allow you to set the network
configuration during the installation process.
Use the CD, DVD, or virtual ISO method and complete the network configuration after
Oracle VM is installed.
Advertisement
Table of Contents
