Oracle X4 series Administration Manual page 184

Restore Oracle System Assistant Software
You must have local or remote view and response access to the server boot messages. For
Before You Begin ■
more information, refer to your server installation guide.
Download the appropriate image file from the My Oracle Support web site.
1.
Download the image that is specific to your server. The package name for the update image for
the server is:
system_name and SW version -- Oracle System Assistant
For information about accessing My Oracle Support and downloading this image, see
Oracle System Assistant and the Firmware Files on the Oracle System Assistant USB Drive
(Oracle System Assistant Release 1.1)" on page
To make the update image available to the server, do one of the following:
2.
Use the image file to burn a physical DVD image.
■
Install the DVD in a DVD drive attached to the server.
Make the update image file available to the server as an ISO image using the
■
Oracle ILOM Remote Console application.
3. Reset or power on the server.
Choose one of the following methods:
From the local server, press the Power button (approximately 1 second)
■
on the server front panel to power off the server, and then press the Power
button again to power on the server.
From the Oracle ILOM web interface, click Host Management > Power
■
Control, and select Reset from the Select Action drop-down list.
184 Oracle X4 Series Servers Administration Guide • April 2016
225.
"Update