Table of Contents
Advertisement
e.
Fill in the target name iSCSI Qualified Name (iqn) format.
f.
If the target is not going to use DHCP, fill in the Target IP, Target Port, and
Boot LUN.
g.
Select OK.
The iSCSI Port Configuration window appears.
10.
Select iSCSI CHAP Configuration.
The iSCSI CHAP Configuration window appears.
Enter the following items:
11.
a.
Select one of the CHAP options:
If you use CHAP, fill in the User Name and Target Secret.
■
If you use Mutual CHAP, fill in the Initiator Secret.
■
Modify iSCSI Virtual Drive Properties in Legacy BIOS Boot Mode (BIOS)
Configuring Storage Resources
71
Advertisement
Table of Contents
Need help?
Do you have a question about the X4 series and is the answer not in the manual?