Export Usage Logs (Oracle System Assistant 1.2) - Oracle X4 series Administration Manual

Loss of service. Selecting Factory or All erases the current Oracle ILOM
Caution -
configuration and returns the configuration to factory defaults. This can make Oracle ILOM
unusable until it is reconfigured.
Factory: Returns all SP settings to factory defaults and clears all log files.
■
All: Returns all SP settings to factory defaults but preserves log files.
■
None: Nullifies any pending All or Factory selections (if the system has not been rebooted).
■
5. When you are done, click Apply Settings.
Oracle System Assistant applies your selection on the next boot.

Export Usage Logs (Oracle System Assistant 1.2)

Oracle System Assistant release 1.2 allows you to export usage log files to a USB drive, an FTP
server, or a network location using Secure Copy (SCP).
These files contain tracking information for each Oracle System Assistant task. They are useful
for fixing problems.
Information Security. The usage log files might contain secure information, and
Caution -
should be protected from unauthorized access.
1. Click the Advanced Tasks button and then click the Export Usage Log tab.
The Export Usage Log page appears.
2. Select an export method (destination) and fill in the required information.
You cannot save the logs to the Oracle System Assistant USB drive.
3. Click the Export Usage Log button.
Oracle System Assistant exports the file to the configured location.

Export Usage Logs (Oracle System Assistant 1.2)

Managing Oracle System Assistant 175