Table of Contents
Advertisement
Modify iSCSI Virtual Drive Properties in Legacy BIOS Boot Mode (BIOS)
The iSCSI Boot Configuration window appears.
9.
Do the following:
Configure the initiator to use DHCP (or not) by selecting or deselecting Use
a.
dynamic IP Configuration (DHCP).
Type the initiator name in iSCSI Qualified Name (iqn) format. For example:
b.
iqn.1988-12.com.oracle:0010e02e458f
c.
If the initiator is not going to use DHCP, fill in the other network information.
If the initiator is going to use DHCP, these selections are unavailable.
d.
Select Use DHCP for iSCSI Target information if you want DHCP to provide
the iSCSI target parameters.
Otherwise, fill in the Target IP, Target Port, and Boot LUN.
70
Oracle X4 Series Servers Administration Guide • April 2016
Advertisement
Table of Contents
