Wireless Setup - Simrad GO XSE Installation Manual

52
Setting CZone to display at startup
With this option selected, the CZone control page is shown first,
every time the GO XSE is powered up.
CZone backlight control
Enabling this causes the GO XSE to synchronize its backlight setting
with that of any CZone Display Interfaces set up to share backlight
settings.
Ú Note:
CZone Config also needs to have the GO XSE set as a
controller.

Wireless setup

The unit includes built-in wireless functionality that lets you:
• Use a wireless device to remotely view (smartphone and tablet)
and control the system (tablet only). Wireless devices use the
GoFree app downloaded from their relevant application store.
• Access the GoFree Shop.
• Upload your logs to create custom maps at Insight Genesis.
• Download software updates
• Connect to third party applications
Connecting a tablet
Install the GoFree App on the tablet before following this
procedure.
1. Set the internal wireless to Access Point mode. To do this,
select the Wireless devices page in the Wireless settings
dialog and then select the Internal wireless. Next, select the
Mode option and then select Internal Access Point.
2. Select the Internal Wireless device on the Wireless devices
page to view its Network key.
3.
Navigate to the wireless network connection page on the tablet,
and find the unit or GoFree wireless xxxx network. If more than
one is in range, review the Wireless devices page on the unit
to confirm which wireless device is connected to the unit.
4.
Enter the Network Key in the tablet to connect to the network.
5.
Open the GoFree application - the unit should be automatically
detected. The name displayed will be either the default, or that
assigned in the Device Name setting. If the unit does not
Software Setup | GO XSE Installation Manual