Simrad GO XSE Installation Manual page 43

Radar status
Scanner type
Identifies the model of scanner connected to the network.
Software version
Check to make sure you have the latest software. Check the latest
software version available at: www.simrad-yachting.com.
Serial Number
This number should be recorded for support and insurance
purposes.
MARPA status
The MARPA status can identify if a heading sensor is on the network
and that the radar is receiving heading information essential for
MARPA calculations.
Reset device ID
Should a radar be connected to the network that has been
connected to a dual radar network in the past, it might not be
detected by the system because it might have an invalid Device ID.
With the radar connected and powered up, select the Reset Device
ID button to resolve this problem.
43
Software Setup | GO XSE Installation Manual